View HR31-508P-5PC_4573427.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Interface Connectors for Factory Automation Network
HR31 Series Complies with Device Net requirements
Comparison of plug heights (actual size) qHirose HR31
10.2
qOther manufacturer's product
s Features
1. Device-Net Compliant
Conforms to requirements of Factory Automation Network Device-Net standards. Hirose products are distinct from products of made others, as described below.
Feature Reduced number of termination operations High density mounting Prevention of connection errors Number of required operations to secure receptacle assembly to the board Made by others Crimped to commercially available cap connectors, inserted into housing and fastened by screw. Plug height : 15 mm Contact positions not identified. Connectors are attached by screws from the opposite side. Hirose HR31 Crimped and connected to terminal then fastened simply by inserting into housing. Plug height is 10.2 mm, allowing use of less space when mounting several connectors Permanently identified contact positions No need for screws, built-in locking pin secures connector to the board
2 Locking features
The connectors can be supplied with either of the following locking features: -Screw lock, using attached screws. -Snap lock, using built-in feature with a definite click-sensation.
Total space occupied by mated assemblies
3. Commercially available tools may be used
Use crimp tools conforming to JIS C 9711 standards. Terminated contacts can be removed using 1 mm dia. steel pin. and re-inserted.
With screw lock
12 20
Without screw lock
12 20
34
35.5
27.4
27
34
4. Prevention of deformation of the contacts
When fully inserted, the plug contacts are fully protected by the walls of the insulator body eliminating a risk of accidental damage.
5
5
15
12
10.2
s Applications
Power units and communications units of factory automation related devices
10.2
12
27
2006.8
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
s Product Specifications
Rating
Current rating Voltage rating
12A (2.5mm2 wire) 10A (1.5mm2 wire) 250V AC, 350V DC Specification
Operating temperature range Storage temperature range
-40c to +100c -40c to +85c (Note 2)
Item 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Impulse withstanding voltage 5.Vibration 6.Durability (insertion/ withdrawal) 7.Temperature cycle 5 m ohms max. 1000 M ohms min.
Conditions 1A DC 500 V DC 2000V AC/one minute Standard waveform of 4KV, positive/negative, 3 times each Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min. in each of the 3 directions, 10 cycles each 1000 cycles Temperature: -40c / Room temperature to +100c / Room temperature Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) 5 cycles
No flashover or insulation breakdown No flashover or insulation breakdown No electrical discontinuity of 10 s or more Contact resistance: 10 m ohms max.
Insulation resistance: 1000 M ohms min.
8.Humidity
Insulation resistance: 10 M ohms min. (Humidity state) 100 M ohms min. (Dry state)
96 hours at temperature of 40c and humidity of 90% to 95%
s Materials
Part Plug Insulator Screw Crimp contact Socket contact Insulator Male contact Receptacle Nut Board retention pin Steel Phosphor bronze PBT Steel Contact area: phosphor bronze Termination area: copper PBT Brass Material Finish Color: Black or Green Nickel plating Contact area: gold plating Termination area: tin plating Color: Black or Green Contact area: gold plating Termination are: gold plating Nickel plating Tin plating UL94V-0 UL94V-0 Remarks
s Ordering information
qConnector
HR31 - 5.08 P A - 5 S C (01)
1 1 Series name 2 Contact pitch 3 Connector type 4 Screw lock type 5 No. of contacts 2 3 4 5 6 7 8 HR31 5.08mm P: Plug R: Receptacle Blank: With screw A: Without screw 5 6 Contact type S: Female contact P: Male contact 7 Terminal type C: Crimping DL: Right angle through hole type D: Straight through hole type 8 Color, plating, board retention pin type
qCrimp contact
HR31 - SC - 1 1 1 (01)
9 9 10 11 12 10 11 12 13 14 13 Plating type 1: Gold plating 14 Suffix Series name HR31 Contact type SC: female contact Contact packaging type 1: loose contact Conductor cross area 1: 1.04 to 2.63mm2 2: 0.25 to 1.65mm2
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
s Plug (with screw lock)
27
25.4 35.5
HR31-5.08P-5SC
Part No. HR31-5.08P-5SC(71) HR31-5.08P-5SC(72) CL No. 131-0002-2-71 131-0002-2-72 Weight 8g Color Black Green RoHS YES
Plug (without screw lock)
27
25.4
8.3
HR31-5.08PA-5SC
Part No. HR31-5.08PA-5SC HR31-5.08PA-5SC(01) CL No. 131-0009-1 131-0009-1-01 Weight 6g Color Black Green RoHS YES
s Crimp contact
23 2.35
B
10.2
B-B B
Part No. HR31-SC-111(71) HR31-SC-121(71)
CL No. 131-0004-8-71 131-0005-0-71
OA 4 3.3
Weight 1g
Contact plating Gold
OA
Applicable conductor cross area (Note 2) 1.04 to 2.63mm
2
28.3
10.2
1 2 3 4 5
8.3
28.3
Note 1: Bag packaging (100 pieces/bag) Note 2: For a multi-strand conductors
12345
RoHS YES 0.2 to 1.65mm2
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
s Receptacle (Right angle through hole type with screw lock)
Contact plating 35.5 8.6
1 2 3 4 5
12
7.5 10
HR31-5.08R-5PDL
Part No. HR31-5.08R-5PDL(72) HR31-5.08R-5PDL(74) HR31-5.08R-5PDL(75) HR31-5.08R-5PDL(76) CL No. 131-0001-0-72 131-0001-0-74 131-0001-0-75 131-0001-0-76 4g Green Weight Color Black Gold Contact plating Board retention pin With Without With Without YES RoHS
Receptacle (Right angle through hole type without screw lock)
3.3 3
Contact plating 27.4
1 2 3 4 5
12
8.6 3
HR31-5.08RA-5PDL
Part No. HR31-5.08RA-5PDL(72) HR31-5.08RA-5PDL(74) HR31-5.08RA-5PDL(75) HR31-5.08RA-5PDL(76) CL No. 131-0008-9-72 131-0008-9-74 131-0008-9-75 131-0008-9-76 2g Weight
3.3
10 10.25
Color Black
Contact plating
Board retention pin With
RoHS
Gold Green
Without With Without
YES
BPCB mounting pattern
q With screw lock
7.50.05
+0.1 0
q Without screw lock
(Th roug h ho le)
1.6 5-O
10 0.05
gh te) hrou (No .3 +00.1 (T O2 2-
hole
)
(N o .3 O2 2te)
.1 +0 0
(T
u hro
gh
6
ho
le)
ugh
hol
e)
10.250.05
O1. 5-
.1 +0 0
ro (Th
5.080.05 10.160.05 15.240.05 15.240.05
5.080.05 10.160.05 Connector mounting side
5.080.05 10.160.05 12.60.05 12.60.05
100.05
5.080.05 10.160.05 Connector mounting side
(Board thickness =1.6)
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
s Receptacle (Straight through hole type with screw lock)
35.5
1 2 3 4 5
8.6
Connector mounting side B
12
3 4.3
HR31-5.08R-5PD
Part No. HR31-5.08R-5PD(72) HR31-5.08R-5PD(74) HR31-5.08R-5PD(75) HR31-5.08R-5PD(76) CL No. 131-0003-5-72 131-0003-5-74 131-0003-5-75 131-0003-5-76 4g Green Weight Color Black Gold Contact plating Board retention pin With Without With Without YES RoHS
Receptacle (Straight through hole type without screw lock)
27.4
8.6
1
2
3
4
5
3
HR31-5.08RA-5PD
Part No. HR31-5.08RA-5PD(72) HR31-5.08RA-5PD(74) HR31-5.08RA-5PD(75) HR31-5.08RA-5PD(76) CL No. 131-0016-7-72 131-0016-7-74 131-0016-7-75 131-0016-7-76 2g Weight
Connector mounting side B
12
4.3
Color Black
Contact plating
Board retention pin With
3.8
RoHS
Gold Green
Without With Without
YES
BPCB mounting pattern
q With screw lock
3.80.05
1. -O 6
.1 +0 0
q Without screw lock
(Th rou gh ho le)
h oug hole )
50.05
5
3.80.05
hr te) (No 3+00.1 (T 2. -O 2
(N
) .1 (T ote .3+00 O2 2-
u hro
gh
ho
le)
O1 5-
.6
.1 +00
(T
u hro
gh
ho
le)
5.080.05 10.160.05 15.240.05 15.240.05
5.080.05 10.160.05
5.080.05 10.160.05 12.60.05 12.60.05
5.080.05 10.160.05 Connector mounting side B
Connector mounting side B
(Board thickness =1.6)
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
s Tools
Type Part No. CL No.
Manual crimp tool Contact removal pin
HR31-TC-01 HR31-SC-TP
150-0217-7 150-0215-1
Manual crimp tool
Contact removal pin
q Tools application procedures 1. Manual contact crimp tool The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip length is 5mm.
Crimp position indicator Applicable crimp contact
2 1.25
HR31-SC-113 or HR31-SC-111 HR31-SC-123 or HR31-SC-121
Crimp position indicator
1.25
2. Contact removal pin Contact removal pin provides easy method of contact removal from plug assembly. 1) Fully insert the long end of the contact removal pin into the opening in the insulator. 2) Move the pin forward, in the direction of the mating face. This will cause the terminated contact to move in opposite direction. 3) Pull out the wire with the attached crimped contact.
2
Molded-in lance Wire
Molded-in lance Wire Pull-out
Insertion direction Contact removal pin Contact removal pin
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Usage Precautions
1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to excess loads. 1.1 Recommended mounting panel dimensions (right angle through hole type)
Panel 5 min. 3.2 0
+0.2
A 16.6 0.1
+0.2 20
Part No. HR31-5.08R-5PDL(**) HR31-5.08RA-5PDL(**)
A 36 +0.2 +0 27.9 +0.2 +0
7.8 +0.2 0
11 0
+0.2
Board
1.2 Recommended mounting panel dimensions (straight through hole type)
Panel 5 min. 3.2 B 16.6 0.1 2 +0.2 0
Part No. HR31-5.08R-5PD(**) HR31-5.08RA-5PD(**)
B 36 +0.2 +0 27.9 +0.2 +0
7.8
2. Insert the crimp contact into the plug in the direction shown below.
0.2+0.2 0
11+0.2 0
+0.2 0
Crimp contact
Wire
3. Use a number 0 cross drive bit to tighten the screw lock's screw. 4. Assure that the circuit's power is off when mating and un-mating connectors.
7

▲Up To Search▲

Price & Availability of HR31-508P-5PC

	To Download HR31-508P-5PC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .